HK 11 Parts Kit 7.62x51
Model: HK11 Parts Kit
MANUFACTURER: Heckler Koch
Enter your email and we will notify you when restocked.
By submitting you agree with our Privacy policy
In stock options to consider
HK 11 Parts Kit 7.62x51
- Heckler & Kock HK11 Parts Kit
- Caliber 7.62x51
- Demilled to BATFE Specs
- Rare
- Military Surplus
- Rated NRA Good to Better
HK 11 Parts Kit 7.62x51mm comes with everything but the receiver and were demilled to BATFE Specs. These were once machine guns built during the 70's and 80's. Probably the coolest part about this parts kit is that the parts are interchangeable with other HK Variants. As is this kit is a magazine fed. However, you could also build or have this built as a belt feed. Another option would be to build this using some HK23e, HK21e, HK13 components. The possibilities are limited only by your imagination and your budget. These can be built on an HK91 Receiver or Receiver Flat modified to work for your application. Extremely limited inventory. Get your while they last!. Heckler & Koch
7059
Condition Standards for Antique/Surplus Firearms (As defined by the National Rifle Association)
- FACTORY NEW- all original parts; 100% original finish; in perfect condition in every respect, inside and out.
- EXCELLENT- all original parts; over 80% original finish; sharp lettering, numerals and design on metal and wood; unmarred wood; fine bore.
- FINE- all original parts; over 30% original finish; sharp lettering, numerals and design on metal and wood; minor marks in wood, good bore.
- VERY GOOD- all original parts; none to 30% original finish; original metal surfaces smooth with all edges sharp; clear lettering, numerals and design on metal; wood slightly scratched or bruised; bore disregarded for collectors firearms.
- GOOD- some minor replacement parts; metal smoothly rusted or lightly pitted in places, cleaned or reblued; principal lettering, numerals and design on metal legible; wood refinished, scratched, bruised or minor cracks repaired; in good working order.
- FAIR- some major parts replaced; minor replacement parts may be required; metal rusted, may be lightly pitted all over, vigorously cleaned or reblued; rounded edges of metal and wood; principal lettering, numerals and design on metal partly obliterated; wood scratched, bruised, cracked or repaired where broken; in fair working order or can be easily repaired and placed in working order.
- POOR- major and minor parts replaced; major replacement parts required and extensive restoration needed; metal deeply pitted; principal lettering, numerals and design obliterated; wood badly scratched, bruised, cracked or broken; mechanically inoperative; generally undesirable as a collectors firearm.
The process of grading and inspecting surplus firearms is very subjective and involves numerous details. We always try our best to be as accurate as possible, but we do not inspect firearms and rely on the rating provided by the importer. It is important with the nature of surplus firearms that it be thoroughly cleaned and inspected before use, preferably by a knowledgeable and trained Gunsmith. Please make sure that you are using the correct ammo for the firearm and understand the safe operating procedure.There is no warranty or returns offered on surplus firearms unless otherwise agreed upon in writing by email with sales@atlanticfirearms.com.
Please Note: All ammo should be considered possibly harmful to your firearm. You should always clean and oil your firearm after shooting to prevent any issues.
Important Information
It is your responsibility to be familiar with your current local gun laws BEFORE placing your order. You must talk to your FFL BEFORE you place your order, to make sure they will handle the transfer & legality of the firearm in your area. Please feel free to email us with questions you may have. By placing an order with Atlantic Firearms you are acknowledging and agreeing to all Terms and Conditions outlined in the Terms And Conditions section.
