News Flash : Orders may take 5-7 business days to ship out. Covid 19 Virus workplace restrictions and increase in demand may cause delays in email or phone responses .It could take 24 -48 hours based on the incoming volume of inquires. Sorry no changes to orders once placed. If purchasing a Firearms please Verify legality of the item with your FFL dealer BEFORE ordering to avoid cancelation fees. Please review the How to Buy section and other directions Before ordering. Stay Safe & Wash Your Hands!
VZ 58 CQB Rifle Czechpoint
CzechPoint Inc. is located in the United States was launched in October 2008. They are a direct partner with Czech Small Arms, a firearms manufacturer located in Jablunka, Czech Republic. CzechPoint is the sole importer and primary distributor for the following Czech Small Arms (CSA) manufactured firearms the Sa vz. 58 Sporter rifle, the Sa vz.58 Sporter pistol, and the Sa vz. 61 Pistol. CzechPoint is proud to be the sole importer and distributor of Alfa Proj revolvers manufactured in Brno, Czech Republic. CzechPoint will help to eliminate communication issues and offer firearms dealers and buyers a source of contact for CSA products.
The Sa vz. 58 CQB 762x39mm Rifle model
- Shortest vz. 58 barrel length (with Phantom flash hider) that is NOT an SBR (Short Barreled Rifle)
- Bayonet lug is attached and will accept vz. 58 surplus bipods, but not surplus bayonets as the barrel is too short for bayonet clearance (bipod in photos not included).
- Flash hider permanently attached by blind pinned method
- Chrome lined 14.25 inch barrel is new manufacture by Lothar Walther in Germany
- This is a Czech Small Arms factory CQB barrel length (not modified from a 16 inch barrel)
- Flat black finish cured at 300 degrees Fahrenheit
- TactLite six position collapsible stock utilizing Mil-Spec extension tube with new production polymer injected pistol grip and upper and lower handguard
- Patented push-down plate on bolt carrier to prevent misfire issues (D-Technik/Czech Small Arms vz. 58 firearms are the only vz. 58s manufactured with this vital part to ensure reliability)
- Two 30 round magazines style may vary. (if you are located in a magazine restricted state, a 10 round magazine and 3 stripper clips will be sent in place of the two 30 round magazines)
- CD containing manual and historical information
- Cleaning kit (does not include oil can)
- New production black color sling
- 5 year manufacturers warranty
New for Czechpoint is the VZ58 7.62x39mm CQB Rifle, CQB Stands for 'Close Quarters Battle.' The Czech Small Arms factory CQB rifle model is an ideal rifle for training and operating in confined areas or close quarters as it was designed with a compact profile in mind. Its compact size, barrel length (including flash hider) and overall length make this rifle an excellent choice when a non-NFA firearm is needed. Barrel length, not including permanently attached flash hider is 14.25 inches (with permanently attached flash hider, barrel length is 16.25 inches). Overall rifle length of the CQB model with stock collapsed is 33.75 inches.
As found throughout the Czech Small Arms (CSA) line of vz.58 rifles and pistols, the vz.58 CQB 762 possesses the patented 'push-down' plate on the bolt carrier. The patented ‘push-down’ plate ensures the user will not experience possible misfire problems that can be found with other manufacturer vz.58 type firearms.
The vz.58 Sporter was imported into the United States in compliance with 18 U.S.C. 925(d)(3). CzechPoint adds USA made parts to the vz. 58 Sporter so as to legally reconfigure the firearm with a separate pistol grip and stock. This means that all vz. 58 rifles capable of using double stack magazines possess 5 USA made parts to fully comply with Title 18, U.S.C., Section 922(r).
This rifle model includes seven USA made parts (only five US made parts are required for 922r compliance so this rifle model possesses two extra US made parts). The seven USA made parts are: trigger (glass-filled nylon), handguard, grip, polymer follower, polymer floor plate, buttstock, and flash hider. The Czech Small Arms stock adapter mounts the M4 style stock tube at the bottom area of the vz.58 receiver and has a slight downward angle (as can been seen in the photos to the left). Even though this adapter mounts the M4 style stock slightly higher than the original vz.58 wood impregnated stock, it still provides a comfortable cheek weld for iron sights.
The color of the finish is a semi gloss/matte black coating (cured at 300°F). The new production rifle barrels are manufactured by Lothar Walther in Germany and made from a high alloy Chrome Molybdenum steel (4340) and is chrome-lined.
Please note that we are unable to fill requests for a specific trigger guard, front sight base, or sling swivel. Over the years, different trigger guards and sling swivels were manufactured as well as two different front sight bases (enclosed circle or ears protecting the front sight post). One is not better than the other - they are just slightly different.
PLEASE NOTE: If you live in a magazine restricted state we remove the hi cap mag and will be glad to substitute with a 10 round mag IF AVAILABLE. If a 10 round mag is not available we will remove the hi cap magazine from the shipment. We cannot ship prohibited magazines to out of state addresses. There will be no substitutions or discounts offered for removal of mags.
It is your responsibility to be familiar with your current local gun laws BEFORE placing your order. Please feel free to email us with questions you may have.
By placing an order with Atlantic Firearms you are acknowledging and agreeing to all Terms and Conditions outlined in the Terms And Conditions section.